Вход на сервер

M

mandalex

Путник
Пользователь
Сообщения
20
Розыгрыши
0
Репутация
0
Реакции
0
Баллы
0
Всем привет помогите, в чем проблема может быть, заходит на сервер исключительно с 3 раза, с 3 раза ввода пароля, а до этого пишет неправильный пароль. Сборка l2core rev14

02:35:53.593 Could not check password:
com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: The last packet success
fully received from the server was 287┬а467 milliseconds ago. The last packet s
ent successfully to the server was 287┬а467 milliseconds ago. is longer than the
server configured value of 'wait_timeout'. You should consider either expiring
and/or testing connection validity before use in your application, increasing th
e server configured values for client timeouts, or using the Connector/J connect
ion property 'autoReconnect=true' to avoid this problem.
at sun.reflect.GeneratedConstructorAccessor7.newInstance(Unknown Source)

at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:45)
at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
at com.mysql.jdbc.Util.handleNewInstance(Util.java:411)
at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1
117)
at com.mysql.jdbc.MysqlIO.send(MysqlIO.java:3851)
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:2471)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2651)
at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2734)
at com.mysql.jdbc.PreparedStatement.executeInternal(PreparedStatement.ja
va:2155)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:
2322)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(Dele
gatingPreparedStatement.java:96)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(Dele
gatingPreparedStatement.java:96)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(Dele
gatingPreparedStatement.java:96)
at l2s.database.FiltredPreparedStatement.executeQuery(FiltredPreparedSta
tement.java:20)
at l2s.login.LoginController.loginValid(LoginController.java:423)
at l2s.login.LoginController.tryAuthLogin(LoginController.java:217)
at l2s.login.network.clientpackets.RequestAuthLogin.runImpl(RequestAuthL
ogin.java:104)
at l2s.login.network.clientpackets.L2LoginClientPacket.run(L2LoginClient
Packet.java:33)
at l2s.commons.threading.ExecuteWrapper.execute(ExecuteWrapper.java:57)
at l2s.commons.threading.FIFORunnableQueue.removeAndExecuteAll(FIFORunna
bleQueue.java:21)
at l2s.commons.threading.FIFOExecutableQueue.run(FIFOExecutableQueue.jav
a:81)
at l2s.commons.threading.FIFOExecutableQueue.executeNow(FIFOExecutableQu
eue.java:58)
at l2s.commons.threading.FIFOSimpleExecutableQueue.executeNow(FIFOSimple
ExecutableQueue.java:46)
at l2s.login.network.L2LoginClient.executePacket(L2LoginClient.java:318)

at l2s.login.network.L2LoginClient.executePacket(L2LoginClient.java:25)
at l2s.commons.network.SelectorThread.parseClientPacket(SelectorThread.j
ava:518)
at l2s.commons.network.SelectorThread.tryReadPacket(SelectorThread.java:
435)
at l2s.commons.network.SelectorThread.readPacket(SelectorThread.java:380
)
at l2s.commons.network.SelectorThread.run(SelectorThread.java:220)
Caused by: java.net.SocketException: Software caused connection abort: socket wr
ite error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:109)
at java.net.SocketOutputStream.write(SocketOutputStream.java:153)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:82
)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:140)
at com.mysql.jdbc.MysqlIO.send(MysqlIO.java:3832)
... 24 more
 

mandalex написал(а):
Всем привет помогите, в чем проблема может быть, заходит на сервер исключительно с 3 раза, с 3 раза ввода пароля, а до этого пишет неправильный пароль. Сборка l2core rev14

02:35:53.593 Could not check password:
com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: The last packet success
fully received from the server was 287┬а467 milliseconds ago. The last packet s
ent successfully to the server was 287┬а467 milliseconds ago. is longer than the
server configured value of 'wait_timeout'. You should consider either expiring
and/or testing connection validity before use in your application, increasing th
e server configured values for client timeouts, or using the Connector/J connect
ion property 'autoReconnect=true' to avoid this problem.
at sun.reflect.GeneratedConstructorAccessor7.newInstance(Unknown Source)

at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:45)
at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
at com.mysql.jdbc.Util.handleNewInstance(Util.java:411)
at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1
117)
at com.mysql.jdbc.MysqlIO.send(MysqlIO.java:3851)
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:2471)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2651)
at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2734)
at com.mysql.jdbc.PreparedStatement.executeInternal(PreparedStatement.ja
va:2155)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:
2322)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(Dele
gatingPreparedStatement.java:96)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(Dele
gatingPreparedStatement.java:96)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(Dele
gatingPreparedStatement.java:96)
at l2s.database.FiltredPreparedStatement.executeQuery(FiltredPreparedSta
tement.java:20)
at l2s.login.LoginController.loginValid(LoginController.java:423)
at l2s.login.LoginController.tryAuthLogin(LoginController.java:217)
at l2s.login.network.clientpackets.RequestAuthLogin.runImpl(RequestAuthL
ogin.java:104)
at l2s.login.network.clientpackets.L2LoginClientPacket.run(L2LoginClient
Packet.java:33)
at l2s.commons.threading.ExecuteWrapper.execute(ExecuteWrapper.java:57)
at l2s.commons.threading.FIFORunnableQueue.removeAndExecuteAll(FIFORunna
bleQueue.java:21)
at l2s.commons.threading.FIFOExecutableQueue.run(FIFOExecutableQueue.jav
a:81)
at l2s.commons.threading.FIFOExecutableQueue.executeNow(FIFOExecutableQu
eue.java:58)
at l2s.commons.threading.FIFOSimpleExecutableQueue.executeNow(FIFOSimple
ExecutableQueue.java:46)
at l2s.login.network.L2LoginClient.executePacket(L2LoginClient.java:318)

at l2s.login.network.L2LoginClient.executePacket(L2LoginClient.java:25)
at l2s.commons.network.SelectorThread.parseClientPacket(SelectorThread.j
ava:518)
at l2s.commons.network.SelectorThread.tryReadPacket(SelectorThread.java:
435)
at l2s.commons.network.SelectorThread.readPacket(SelectorThread.java:380
)
at l2s.commons.network.SelectorThread.run(SelectorThread.java:220)
Caused by: java.net.SocketException: Software caused connection abort: socket wr
ite error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:109)
at java.net.SocketOutputStream.write(SocketOutputStream.java:153)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:82
)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:140)
at com.mysql.jdbc.MysqlIO.send(MysqlIO.java:3832)
... 24 more
Нажмите, чтобы раскрыть...



Попробуй найти в конфигах
сonnection.property и поставить autoReconnect=true
 
connection.pool
вот такой файл есть и все, но полностью пустой

#----------------------------------------------
# Настрока пула конектов для субд !
# Желательно не менять настроек если не знаете для чего они!!!
#----------------------------------------------

# Настроки для пула с использованием BoneCP
Вы не можете просматривать ссылку пожалуйста воспользуйтесь следующими ссылками Вход или Регистрация

#----------------------------------------------

# Время в минутах, как часто будет делатся проверка конекта к БД.
# Default: 240 min, set to 0 to disable
idleConnectionTestPeriod

# The time (in minutes), for a connection to remain unused before it is closed off. Do not use aggressive values here!
# Default: 60 minutes, set to 0 to disable
idleMaxAge

# In order to reduce lock contention and thus improve performance, each incoming connection request picks off
# a connection from a pool that has thread-affinity, i.e. pool[threadId % partition_count].
# The higher this number, the better your performance will be for the case when you have plenty of short-lived threads.
# Beyond a certain threshold, maintenence of these pools will start to have a negative effect on performance
# (and only for the case when connections on a partition start running out).
# Default: 3, minimum: 1, recommended: 3-4 (but very app specific)
partitionCount

# The number of connections to create per partition. Setting this to 5 with 3 partitions means you will have 15 unique
# connections to the database. Note that BoneCP will not create all these connections in one go but rather start off with
# minConnectionsPerPartition and gradually increase connections as required.
# Default: 50
maxConnectionsPerPartition

# The number of connections to start off with per partition.
# Default: 10
minConnectionsPerPartition

# When the available connections are about to run out, BoneCP will dynamically create new ones in batches.
# This property controls how many new connections to create in one go (up to a maximum of maxConnectionsPerPartition).
# Note: This is a per partition setting.
# Default: 10
acquireIncrement

# Number of threads to create that will handle releasing a connection. Useful when your application is doing lots
# of work on each connection (i.e. perform an SQL query, do lots of non-DB stuff and perform another query),
# otherwise will probably slow things down.
# Default: 3, Set to 0 to disable.
releaseHelperThreads

# Instruct the pool to create a helper thread to watch over connection acquires that are never released (or released twice).
# When the pool detects such a condition it will log a stack trace of the source of the problem.
# This is intended for debugging purposes only - it incurs a large negative performance impact.
# Default: false
closeConnectionWatch

# Stops the pool from talking to the database until a first getConnection() request is made.
# Default: false
lazyInit

#----------------------------------------------
# Настроки для пула с использованием Apache DBCP
Вы не можете просматривать ссылку пожалуйста воспользуйтесь следующими ссылками Вход или Регистрация

#----------------------------------------------



#----------------------------------------------
# Настроки для пула с использованием C3P0
Вы не можете просматривать ссылку пожалуйста воспользуйтесь следующими ссылками Вход или Регистрация

#----------------------------------------------
 
mandalex написал(а):
connection.pool
вот такой файл есть и все, но полностью пустой

#----------------------------------------------
# Настрока пула конектов для субд !
# Желательно не менять настроек если не знаете для чего они!!!
#----------------------------------------------

# Настроки для пула с использованием BoneCP
Вы не можете просматривать ссылку пожалуйста воспользуйтесь следующими ссылками Вход или Регистрация

#----------------------------------------------

# Время в минутах, как часто будет делатся проверка конекта к БД.
# Default: 240 min, set to 0 to disable
idleConnectionTestPeriod

# The time (in minutes), for a connection to remain unused before it is closed off. Do not use aggressive values here!
# Default: 60 minutes, set to 0 to disable
idleMaxAge

# In order to reduce lock contention and thus improve performance, each incoming connection request picks off
# a connection from a pool that has thread-affinity, i.e. pool[threadId % partition_count].
# The higher this number, the better your performance will be for the case when you have plenty of short-lived threads.
# Beyond a certain threshold, maintenence of these pools will start to have a negative effect on performance
# (and only for the case when connections on a partition start running out).
# Default: 3, minimum: 1, recommended: 3-4 (but very app specific)
partitionCount

# The number of connections to create per partition. Setting this to 5 with 3 partitions means you will have 15 unique
# connections to the database. Note that BoneCP will not create all these connections in one go but rather start off with
# minConnectionsPerPartition and gradually increase connections as required.
# Default: 50
maxConnectionsPerPartition

# The number of connections to start off with per partition.
# Default: 10
minConnectionsPerPartition

# When the available connections are about to run out, BoneCP will dynamically create new ones in batches.
# This property controls how many new connections to create in one go (up to a maximum of maxConnectionsPerPartition).
# Note: This is a per partition setting.
# Default: 10
acquireIncrement

# Number of threads to create that will handle releasing a connection. Useful when your application is doing lots
# of work on each connection (i.e. perform an SQL query, do lots of non-DB stuff and perform another query),
# otherwise will probably slow things down.
# Default: 3, Set to 0 to disable.
releaseHelperThreads

# Instruct the pool to create a helper thread to watch over connection acquires that are never released (or released twice).
# When the pool detects such a condition it will log a stack trace of the source of the problem.
# This is intended for debugging purposes only - it incurs a large negative performance impact.
# Default: false
closeConnectionWatch

# Stops the pool from talking to the database until a first getConnection() request is made.
# Default: false
lazyInit

#----------------------------------------------
# Настроки для пула с использованием Apache DBCP
Вы не можете просматривать ссылку пожалуйста воспользуйтесь следующими ссылками Вход или Регистрация

#----------------------------------------------



#----------------------------------------------
# Настроки для пула с использованием C3P0
Вы не можете просматривать ссылку пожалуйста воспользуйтесь следующими ссылками Вход или Регистрация

#----------------------------------------------
Нажмите, чтобы раскрыть...

В логин сервере попробуй поставить вот так URL = jdbc:mysql://localhost/имя базы ?autoReconnect=true
 
Просто это rcore.
Мой тебе совет - поменяй сборку, ибо потом ты пожалеешь..
 
Функа от брута стоит (включена)? (типо проверяет пасс после выбора сервера)
 
Войдите или зарегистрируйтесь для ответа.

Похожие темы

I
  • Закрыта
  • Вопрос Вопрос
Pw soft вход на сервер
2
Ответы
27
Просмотры
2К
iMax
I
V
  • Вопрос Вопрос
Вход на сервер через VPN
Ответы
8
Просмотры
775
WildDead
WildDead
Zhdanov.ProjectOne
Куплю сервер Lineage 2 High Five
Ответы
1
Просмотры
205
Hedgehog
Hedgehog
Horoshiy070
  • Вопрос Вопрос
Ещё один вопрос по серверу
Ответы
17
Просмотры
449
Maksim
Maksim
S
Ошибка ValidateShieldDefend после длительного времени работы сервера
Ответы
1
Просмотры
201
WmzBot
WmzBot
Назад
Сверху Снизу